Description
This AVR Programmer is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.
Features
- Support USB1.1 or USB2.0 communication
- Support WIN98 WINME, WIN2000, WINXP, VISTA, WIN7, WIN8, WIN10 operating system
- Using the USB port power supply board with a 500mA resettable fuse to protect the computer motherboard was burned by accident
- Chip programming can use the power of the target system itself, can also use the programmer from the USB port
- Take the power supply of the target board, but should ensure that the target standard current less than 500mA, so as not to normal programming
- Programming to complete the program is running does not affect the target board
- Support AT89S51, 52 and AVR series chips burn
- Flash, EEPROM, fuse bits read and write operations
- Operate at 2.7V-5.5V voltage
- Faster than the parallel port programming faster and more stable, more convenient notebook computer users
- With automatic multi-level super-stable speed control firmware download process without human intervention based
- Support the programming of all AVR chips, support for the AT89S51, AT89S52 is
- Download the programmer to support a custom parallel port
- Support for custom serial download programming
- Support USBASP programmer
- Support for custom programmed chips
- Support for custom programming fuse information message
- Support for high-voltage programmer
- Support for offline download for offline download
- Support the command line, can be embedded directly in other IDE
- Green software, no installation, less resource
- Prompt support custom localization information
- Support for project management – all configuration data and programming data can be packaged as a single file
Package Includes:
- 1x USBASP USBISP AVR Programmer
- 1x 10-Pin JTAG Cable
