Thermistor PTC 3K MZ4 COM43

Description

Thermistor PTC 3K  are ceramic components whose electrical resistance rapidly increases when a certain temperature is exceeded. This feature makes them ideal for use in countless applications of modern electrical and electronic engineering.

A PTC thermistor is a thermally sensitive semiconductor resistor. Its resistance value rises sharply with increasing temperature .

Features

Resistance : 3 kOhms
Resistance Tolerance: ±1%
Operating Temperature: -55°C ~ 70°C
Power – Max: 75mW

Getting started with Thermistor PTC 3K 

This example below shows how you can measure your room temperature using PTC 3k with Arduino UNO. For PTC, when resistance increase temperature increase also.

 

 Hardware required

When the manufacturer didn’t specify the value of resistor to be used, you can use the multimeter to calculate its resistance.

• Arduino UNO
• Thermistor PTC 3K
• Resistor 3k
• Jumpers
• Breadboard

Connecting the Hardware

Uploading the codes

int ThermistorPin = 0;

int Vo;

float R1 = 10000;

float logR2, R2, T, Tc, Tf;

float c1 = 1.009249522e-03, c2 = 2.378405444e-04, c3 = 2.019202697e-07;

void setup() {

Serial.begin(9600);

}

void loop() {

Vo = analogRead(ThermistorPin);

R2 = R1 * (1023.0 / (float)Vo – 1.0);

logR2 = log(R2);

T = (1.0 / (c1 + c2*logR2 + c3*logR2*logR2*logR2));

Tc = T – 273.15;

Tf = (Tc * 9.0)/ 5.0 + 32.0;

Serial.print(“Temperature: “);

Serial.print(Tf);

Serial.print(” F; “);

Serial.print(Tc);

Serial.println(” C”);

delay(500);

}

Testing the circuit

Upload the program to the Arduino board and then open the serial monitor. If it works correctly you should get the temperature room on the serial monitor.