GPS Module NEO-6M MOD35 , R23

Fr12,000

This module is compatible with APM2 and APM2.5, and the EEPROM can store all of your configuration data. Interface: RS232 TTL Power: 3-5v Baud rate Default: 9600bps No battery (this is not safe for airmail) Battery model is MS621FE, requires soldering You can download the test program directly from the internet (u-center version 6.31 download (requires Internet connection installation)).

In stock

SKU: WRL4153 Category:

Description

This module is compatible with APM2 and APM2.5, and the EEPROM can store all of your configuration data. Interface: RS232 TTL Power: 3-5v Baud rate Default: 9600bps No battery (this is not safe for airmail) Battery model is MS621FE, requires soldering You can download the test program directly from internet (u-center version 6.31 download (requires Internet connection installation)).

  • Module with antenna, mini size with strong signal.
  • EEPROM save the configuration parameter data when power down.
    With data backup.
    With LED signal lights.
  • Compatible with various flight control modules.
  • Power supply: 3V-5V
  • Models: GY – GPS6MV2
  • The default baud rate: 9600
  • Module size: Approx. 25 mm x 35 mm / 0.98″ x 1.37″

How to get started with GY-NEO6MV2 GPS Module

The GY-NEO6MV2 GPS module series is a family of stand-alone GPS receivers featuring the high performance 6 positioning engine. These flexible and cost effective receivers offer numerous connectivity options in a miniature 16 x 12.2 x 2.4 mm package. Their compact architecture and power and memory options make GY-NEO6MV2 modules ideal for battery operated mobile devices with very strict cost and space constraints.The 50-channel 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated acquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches, enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and mitigates multi-path effects, giving GY-NEO6MV2 GPS receivers excellent navigation performance even in the most challenging environments.

Specifications

  1. Supply Voltage:2.7 to 3.6V
  2. Supply current:67 mA
  3. Antenna gain:50 dB
  4. Operating temperature:-40 to 85°C
  5. Antenna Type:Passive and active antenna
  6. Interfaces:UART,USB,SPI.

Pin Description

  • Vcc-Supply Voltage
  • Gnd-Ground pin
  • TX and RX-These 2 pins acts as an UART interface for communication.
  • PPS (Pulse Per Second) pin is used to time things very accurately.

How to connect NEO6MV2 GPS Module with Arduino UNO?

Hardware and Software Required:

Wiring

That means, you simple connect the 5V Power/VCC and Ground of your Arduino directly to the receiver. The same goes for the TX (green) wire, which gets conected to digital port 3 of your Arduino. For the RX wire to pin 4. Please wait for the module to get connected which is indicated by blinking of an LED.

Installing a library: TinyGPS

On Arduino, the reference and most advanced GPS lib is Mikal Hart’s TinyGPS. Head over to GitHub and download the latest release first.Download the NeoGPS library here. Once complete, unzip the content into your “libraries” subfolder of your Arduino IDE installation and restart the IDE itself. You should now have a new set of “Examples” under File/Examples/TinyGPSPlus-0.95a.

Open the “FullExample” from the examples folder. This module uses baudrate 9600, so in the setup() method find the code “ss.begin(4800);” and replace it with ss.begin(9600);. Now upload the code and open the serial monitor. If the module fails to get a fix, try to use it near a window or outdoors. The fix could take several minutes.“test_with_gps_device.ino” has all the information you need. You will need to set a correct baud rate to 115200 and you are ready to go!
As you can see on my serial monitor I have got the latitude and longitude coordinates. if you get those stars at the beginning all over your serial monitor, wait the module until it is connected to the satellites. That’s all, have fun !!!

Resources:

Arduino library: NeoGPS library
Arduino sketch: “FullExample”
Package includes:
1×GY NEO6MV2 GPS Module With Antenna

Related products