GPS Receiver NEO-6MV2 MOD35, R23

Fr12,500

In stock

SKU: WRL2855 Categories: ,

Description

NEO-6M GPS module with antenna and build-in EEPROM

This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.

Interface: RS232 TTL
Power: 3-5v

Baudrate: 9600 by default

How to get started with GPS Receiver NEO-6MV2

The NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance 6 positioning engine. The 50-channel 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated acquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches, enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and mitigates multi-path effects, giving NEO-6 GPS receivers excellent navigation performance even in themost challenging environments. All NEO-6 modules are based on GPS chips qualified according to AEC-Q100’ industry proven PPP algorithm provides extremely high levels of position accuracy in static and slow moving applications, and makes the NEO-6P an ideal solution for a variety of high precision applications such as surveying, mapping, marine, agriculture or leisure activities. The SPI interface allows for the connection of external devices with a serial interface.

Overview

The module has 4 pins :

  • VCC: Power supply
  • GND: Ground
  • RX: Receiver
  • TX: Transmit

The module is incredibly simple: it just spits non stop NMEA data strings to the TX pin. NMEA” stands for “National Marine Electronics Association” and is a standard text protocol shared by all GPS.

Connecting the GPS Module to Arduino

To connect your GPS module to Arduino, use a +5V from the power side of the Arduino and any ground pin. Any two pins will work for the serial communication, but on this tutorial we will use 3 and 4:

  • Connect Arduino pin 3 to the RX pin of the GPS Module.
  • Connect Arduino pin 4 to the TX pin of the GPS Module.

 

Installing a library: TinyGPSplus

Open your Arduino IDE and go to Sketch>>Include Libraries>>Manage Libraries.

Search for TinyGPSplus and install the Library.

After installing the library, upload this codes into your board. It’s FullExample edited sketch.

#include <TinyGPSPlus.h>
#include <SoftwareSerial.h>
/*
This sample code demonstrates the normal use of a TinyGPSPlus (TinyGPSPlus) object.
It requires the use of SoftwareSerial, and assumes that you have a
4800-baud serial GPS device hooked up on pins 4(rx) and 3(tx).
*/
static const int RXPin = 4, TXPin = 3;
static const uint32_t GPSBaud = 9600;

// The TinyGPSPlus object
TinyGPSPlus gps;

// The serial connection to the GPS device
SoftwareSerial ss(RXPin, TXPin);

void setup()
{
Serial.begin(115200);
ss.begin(GPSBaud);

Serial.println(F("FullExample.ino"));
Serial.println(F("An extensive example of many interesting TinyGPSPlus features"));
Serial.print(F("Testing TinyGPSPlus library v. ")); Serial.println(TinyGPSPlus::libraryVersion());
Serial.println(F("by Mikal Hart"));
Serial.println();
Serial.println(F("Sats HDOP Latitude Longitude Fix Date Time Date Alt Course Speed Card Distance Course Card Chars Sentences Checksum"));
Serial.println(F(" (deg) (deg) Age Age (m) --- from GPS ---- ---- to London ---- RX RX Fail"));
Serial.println(F("----------------------------------------------------------------------------------------------------------------------------------------"));
}

void loop()
{
static const double LONDON_LAT = 51.508131, LONDON_LON = -0.128002;

printInt(gps.satellites.value(), gps.satellites.isValid(), 5);
printFloat(gps.hdop.hdop(), gps.hdop.isValid(), 6, 1);
printFloat(gps.location.lat(), gps.location.isValid(), 11, 6);
printFloat(gps.location.lng(), gps.location.isValid(), 12, 6);
printInt(gps.location.age(), gps.location.isValid(), 5);
printDateTime(gps.date, gps.time);
printFloat(gps.altitude.meters(), gps.altitude.isValid(), 7, 2);
printFloat(gps.course.deg(), gps.course.isValid(), 7, 2);
printFloat(gps.speed.kmph(), gps.speed.isValid(), 6, 2);
printStr(gps.course.isValid() ? TinyGPSPlus::cardinal(gps.course.deg()) : "*** ", 6);

unsigned long distanceKmToLondon =
(unsigned long)TinyGPSPlus::distanceBetween(
gps.location.lat(),
gps.location.lng(),
LONDON_LAT, 
LONDON_LON) / 1000;
printInt(distanceKmToLondon, gps.location.isValid(), 9);

double courseToLondon =
TinyGPSPlus::courseTo(
gps.location.lat(),
gps.location.lng(),
LONDON_LAT, 
LONDON_LON);

printFloat(courseToLondon, gps.location.isValid(), 7, 2);

const char *cardinalToLondon = TinyGPSPlus::cardinal(courseToLondon);

printStr(gps.location.isValid() ? cardinalToLondon : "*** ", 6);

printInt(gps.charsProcessed(), true, 6);
printInt(gps.sentencesWithFix(), true, 10);
printInt(gps.failedChecksum(), true, 9);
Serial.println();

smartDelay(1000);

if (millis() > 5000 && gps.charsProcessed() < 10)
Serial.println(F("No GPS data received: check wiring"));
}

// This custom version of delay() ensures that the gps object
// is being "fed".
static void smartDelay(unsigned long ms)
{
unsigned long start = millis();
do 
{
while (ss.available())
gps.encode(ss.read());
} while (millis() - start < ms);
}

static void printFloat(float val, bool valid, int len, int prec)
{
if (!valid)
{
while (len-- > 1)
Serial.print('*');
Serial.print(' ');
}
else
{
Serial.print(val, prec);
int vi = abs((int)val);
int flen = prec + (val < 0.0 ? 2 : 1); // . and -
flen += vi >= 1000 ? 4 : vi >= 100 ? 3 : vi >= 10 ? 2 : 1;
for (int i=flen; i<len; ++i)
Serial.print(' ');
}
smartDelay(0);
}

static void printInt(unsigned long val, bool valid, int len)
{
char sz[32] = "*****************";
if (valid)
sprintf(sz, "%ld", val);
sz[len] = 0;
for (int i=strlen(sz); i<len; ++i)
sz[i] = ' ';
if (len > 0) 
sz[len-1] = ' ';
Serial.print(sz);
smartDelay(0);
}

static void printDateTime(TinyGPSDate &d, TinyGPSTime &t)
{
if (!d.isValid())
{
Serial.print(F("********** "));
}
else
{
char sz[32];
sprintf(sz, "%02d/%02d/%02d ", d.month(), d.day(), d.year());
Serial.print(sz);
}

if (!t.isValid())
{
Serial.print(F("******** "));
}
else
{
char sz[32];
sprintf(sz, "%02d:%02d:%02d ", t.hour(), t.minute(), t.second());
Serial.print(sz);
}

printInt(d.age(), d.isValid(), 5);
smartDelay(0);
}

static void printStr(const char *str, int len)
{
int slen = strlen(str);
for (int i=0; i<len; ++i)
Serial.print(i<slen ? str[i] : ' ');
smartDelay(0);
}

Here we used 115200 baud rate and RX and TX of GPS are connected to 3 and 4 respectively. To know that your GPS has got connected, its LED will blink continuously. If not yet blinking, wait a moment.

Open your Serial Monitor, set your baud rate(115200) and you should get the coordinates.

Package includes:
1×GPS Reciever NEO-6MV2 Module With Antenna

Related products